来自Contrinex远距离系列的坚固的电感式传感器，高压范围，可以承受这种应用的高工作压力。扩展工作距离允许在传感面上使用厚的、密封的陶瓷盘而不影响传感器的性能。

这些轻质的M5和M8直径的可嵌入传感器的长度分别为27mm和30mm。传感器直接安装在缸壁上，不影响工具的正常运行。感应距离为1毫米（M5传感器）和1.5毫米（M8传感器），消除了因与滑块接触而造成内部机械损坏的任何风险。

传感器具有工业标准的PNP常开配置，并通过灵活的PUR护套电缆与客户的控制系统连接。真空封装的电子元件确保了出色的抗冲击和抗振动能力，而且不需要额外的电气或机械保护。

The sturdy inductive sensors from the Continex long-range series have a high voltage range and can withstand the high working pressure of this application. Condist ® The extended working distance of patented technology allows the use of thick, sealed ceramic discs on the sensing surface without affecting the performance of the sensor.
These lightweight M5 and M8 diameter embeddable sensors have lengths of 27mm and 30mm, respectively. The sensor is directly installed on the cylinder wall without affecting the normal operation of the tool. The sensing distance is 1 millimeter (M5 sensor) and 1.5 millimeters (M8 sensor), eliminating any risk of internal mechanical damage caused by contact with the slider.
The sensor has an industry standard PNP normally open configuration and is connected to the customer's control system through flexible PUR sheathed cables. Vacuum encapsulated electronic components ensure excellent impact and vibration resistance without the need for additional electrical or mechanical protection.