核心功能与定位

系统配置与编程：支持通过工程软件对控制系统的硬件参数、控制逻辑、工艺算法等进行配置和编写，实现系统初始化设置。

数据监控与调试：实时采集控制系统运行数据（如模块状态、输入输出信号值），便于工程师进行系统调试、故障诊断和性能优化。

程序上传与下载：负责将编写好的控制程序从工程师站传输至控制系统，或从系统中读取程序备份，确保程序管理的安全性。

兼容性衔接：兼容 Advant 系统内部各模块（如 I/O 模块、处理器模块）的通信协议，保障系统整体数据传输的一致性。

接口配置
 

- 通信接口：1 个 MB300 接口（用于与系统内部模块互联）、1 个 RS-232 串行接口（用于连接工程师站或外部调试设备）
- 总线支持：适配 32 位 33MHz PCI 总线或 100/133MHz PCI-X 总线，兼容工业标准总线架构

存储与处理

- 内存容量：8Mbyte（满足基础控制程序、配置文件及临时数据存储需求）
- 数据传输速率：匹配 PCI 总线频率，确保高效数据交互

电源规格

- 工作电压：24V DC（工业设备常用低压供电，稳定性高）
- 功耗：典型工作状态下功耗较低，适配系统整体电源配置

环境适应性

- 工作温度：0°C ~ 70°C（满足工业现场控制柜内安装环境要求）
- 湿度范围：5% ~ 95%（非冷凝，防止内部电路受潮）
- 抗干扰性：具备电磁兼容设计，抵御工业环境中的电磁干扰

机械参数

- 尺寸：约 15.2cm×5.1cm×35.6cm（紧凑设计，适配标准工业机架安装）

- 重量：约 0.35kg（轻量化，便于安装与维护）

Core Functions & Positioning

System Configuration and Programming – Supports configuring and writing hardware parameters, control logic, process algorithms, etc., via engineering software to achieve system initialization.

Data Monitoring and Debugging – Collects control system operating data (module status, input/output signal values) in real time to aid engineers in debugging, fault diagnosis, and performance optimization.

Program Upload and Download – Transfers control programs from the engineer station to the control system, or reads program backups from the system to ensure secure program management.

Compatibility Connection – Compatible with communication protocols of various Advant system modules (I/O modules, processor modules), ensuring consistent system-wide data transmission.
 

Category-Specific Specifications

 

Category	Specification
Interface Configuration	– Communication Interfaces: 1 × MB300 interface (for interconnection with internal system modules); 1 × RS-232 serial interface (for engineer stations or external debugging devices) – Bus Support: Compatible with 32-bit 33 MHz PCI bus or 100/133 MHz PCI-X bus, meeting industrial standard bus architecture
Storage & Processing	– Memory Capacity: 8 Mbyte (sufficient for basic control programs, configuration files, and temporary data) – Data Transmission Rate: Matches PCI/PCI-X bus frequency for efficient data exchange
Power Specification	– Operating Voltage: 24 V DC (commonly used low-voltage industrial supply, high stability) – Power Consumption: Low power consumption under typical operating conditions, suitable for system-wide power budgets
Environmental Adaptability	– Operating Temperature: 0 °C to +70 °C (suitable for installation in industrial control cabinets) – Humidity Range: 5 % to 95 % RH, non-condensing (prevents internal circuit moisture) – Anti-Interference: Electromagnetic compatibility (EMC) design resists industrial electromagnetic interference
Mechanical Parameters	– Dimensions: Approx. 15.2 cm × 5.1 cm × 35.6 cm (compact design, compatible with standard industrial rack installation) – Weight: Approx. 0.35 kg (lightweight, easy to install and maintain)