敏捷生产需要快速响应不断变化的消费者需求并支持高效生产，批量小至 1。敏捷生产由可快速重新配置的智能互联资产实现。这些连接的资产实时共享数据；该数据用于通过识别生产中的瓶颈和监控资产的健康状况以消除计划外停机来提高运营绩效。

基于智能运动解决方案的智能制造消耗更少的能源并支持更复杂的运动，从而推动更高水平的灵活性、生产力和可持续性。

智能运动控制解决方案

适用于智能运动应用的 ADI 技术和系统级解决方案正在实现更高水平的性能，同时减少能耗和停机时间。典型的电机驱动信号链由六个关键模块组成。

电力电子

电力电子设备在电机驱动系统中提供电力转换。对于高压系统 (>100 V)，使用隔离式栅极驱动器来驱动功率半导体。ADuM4122 是一款具有 3 A 短路电流 (<3 Ω) 的单栅极隔离式栅极驱动器。它支持高达 ~800 V DC 总线的功能性或增强型隔离，具有用于 EMI/功率损耗优化的压摆率控制。

它还支持用于 SiC 和 GaN 功率半导体的高共模瞬态抗扰度 (CMTI) 和低传播延迟。

ADuM160N 多通道数字隔离器可用于隔离 PWM 信号，以用于集成了栅极驱动器和功率半导体的集成电源模块 (IPM)。ADuM6028 隔离式电源器件可与数字隔离器、隔离式收发器和隔离式数据转换器结合使用，以提供一个非常小型的 8 引脚解决方案，该解决方案已通过全面安全认证，可随时使用。

对于低压系统 (<100 V)，LTC7060 是一款具有浮动接地和可编程死区时间的 100 V 半桥驱动器，或者 LTC7000 是一款具有 PassThru 技术和自适应直通的 150 V 保护高侧 NMOS 静态开关驱动器保护可用于驱动低压半导体。

LTC7000 还支持用于效率优化的可编程死区时间、增强型电流控制和用于降低 EMI 的转换率控制。

电流检测

对于隔离式电流检测测量，ADuM7701 是一款高性能二阶 Σ-Δ 调制器，可将模拟输入信号转换为基于 Analog Devices iCoupler® 技术的片上数字隔离的高速、单位数据流.

ADuM7703 的低失调漂移（大值为 0.6 μV/°C）可降低扭矩纹波，采用紧凑型 8 引脚封装，集成 LDO，可简化电源设计并减小电路板面积。其 150 V/ns min CMTI 额定值可用于 GaN 和 SiC 电力电子设备。

AD8410 高电压、电流检测放大器提供高增益（20 V/V、50 V/V、100 V/V）和低失调漂移（~1 μV/°C）和高带宽（2 MHz），可实现佳电流控制. AD8410 还包括高达 100 V 共模输入的双向电流测量输入。LTC6102 精密零漂移电流检测放大器确保了在各种工作条件下的准确度，并且可以在基于分流器的电流检测应用中从高达 100V 的高侧电压供电。



以下是我司【主营产品】，有需要可以发来帮您对比下价格哦!

主营：世界品牌的PLC 、DCS 系统备件 模块

①Allen-Bradley(美国AB)系列产品》

②Schneider(施耐德电气)系列产品》

③General electric(通用电气)系列产品》

④Westinghouse(美国西屋)系列产品》

⑤SIEMENS(西门子系列产品)》

⑥销售ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。

⑦estinghouse(西屋)： OVATION系统、WDPF系统、MAX0系统备件。

⑧Invensys Foxboro(福克斯波罗)：I/A Series系统，FBM(现场输入/输出模块)顺序控制、梯形逻辑控制、事故追忆处理、数模转换、输入/输出信号处理、数据通信及处理等。Invensys Triconex: 冗余容错控制系统、基于三重模件冗余(TMR)结构的现代化的容错控制器。

⑨Siemens(西门子)：Siemens MOORE， Siemens Simatic C1，Siemens数控系统等。

⑩Bosch Rexroth(博世力士乐)：Indramat，I/O模块,PLC控制器,驱动模块等。

◆Motorola(摩托)：MVME 162、MVME 167、MVME1772、MVME177等系列。

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，

以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出

模块，冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块。



 

Agile production is required to quickly respond to changing consumer demands and support efficient production, down to a batch size of 1. Agile production is enabled by intelligent, connected assets that can be reconfigured quickly. These connected assets share data in real time; this data is used to improve operational performance by identifying bottle necks in production and by monitoring the health of assets to eliminate unplanned downtime.

Smart manufacturing that is built on intelligent motion solutions consumes less energy and enables more complex motion to drive higher levels of flexibility, productivity, and sustainability.

Intelligent motion control solutions

Analog Devices technologies and system-level solutions for intelligent motion applications are enabling higher levels of performance while reducing energy consumption and downtime. A typical motor drive signal chain is comprised of six key blocks.

Power electronics

Power electronics provide the power conversion in a motor drive system. For high voltage systems (>100 V), an isolated gate driver is used to drive the power semiconductors. ADuM4122 is a single-gate isolated gate driver with 3 A short circuit (<3 Ω). It supports functional or reinforced isolation up to ~800 V DC bus with slew rate control for EMI/power loss optimization.

It also supports high common-mode transient immunity (CMTI) and low propagation delay for use with SiC and GaN power semiconductors.

ADuM160N multichannel digital isolators can be used to isolate PWM signals for use with integrated power modules (IPM) that integrate the gate driver with the power semiconductor. The ADuM6028 isolated power device can be used in conjunction with digital isolators, isolated transceivers, and isolated data converters to provide a very small 8-lead solution that is fully safety certified and ready to use.

For low voltage systems (<100 V), the LTC7060, a 100 V half-bridge driver with floating grounds and programmable dead time or the LTC7000, a 150 V protected high-side NMOS static switch driver with PassThru technology and adaptive shoot-through protection can be used to drive low voltage semiconductors.

LTC7000 also supports programmable dead time for efficiency optimization, enhanced current control, and slew rate control for EMI reduction.

Current Sense

For isolated current sense measurement, the ADuM7701 is a high performance, second-order, sigma-delta modulator that converts an analog input signal into a high speed, single-bit data stream with on-chip digital isolation based on Analog Devices iCoupler® technology.

ADuM7703’s low offset drift (0.6 μV/°C max) reduces torque ripple and is packaged in a compact 8-lead package with integrated LDO to simplify power supply design and reduce board area. Its 150 V/ns min CMTI rating enables use with GaN and SiC power electronics.

AD8410 high voltage, current sense amplifiers provide a high gain (20 V/V, 50 V/V, 100 V/V) and low offset drift (~1 μV/°C) with high bandwidth (2 MHz) for optimum current control. AD8410 also includes bidirectional current measurement input up to 100 V common-mode input. The LTC6102 precision zero-drift current sense amplifier ensures accuracy across a wide range of operating conditions and can be powered from high-side voltages up to 100 V in shunt-based current sensing applications.