ABB标准驱动器可以连接到S800 I/O系统。FCI作为
现场总线主机和驱动器之间的通信链路。无应用程序
与该功能相关的软件存储在FCI中。检查可用
支持每种FCI类型。
以下驱动器被视为标准驱动器：
•标准应用ACS600
•标准应用ACS800
•ACS600，带起重机应用
•ACS800，带起重机应用
•ACS600，带泵和风扇应用（PFC）
•ACS800，带泵和风扇应用（PFC）
•带标准驱动器的ACS400
•带标准驱动器的DCS400
•带标准驱动器的DCS500
•DCS600，带起重机应用
产品范围
S800 I/O DTM 5.3版适用于执行各种任务，也称为
称为以下描述中的应用。应用程序具有图形
用户界面。该产品还包含具有HART工具路由的DTM
功能。工具路由描述了一种启用子连接DTM的机制，
例如通过S800 I/O DTM与HART通信的基本HART DTM
连接到S800 I/O模块的仪器。对于此功能，没有图形用户
接口是必需的。

ABB Standard drives can be connected to the S800 I/O system. The FCI works as a communication link between the fieldbus master and the drives. No application software concerning this functionality is stored in the FCI. Check the available support for each FCI type. The following drives are considered to be standard drives: • ACS600 with standard application • ACS800 with standard application • ACS600 with crane application • ACS800 with crane application • ACS600 with pump and fan application (PFC) • ACS800 with pump and fan application (PFC) • ACS400 with standard drive • DCS400 with standard drive • DCS500 with standard drive • DCS600 with crane application Product Scope The S800 I/O DTM version 5.3 is suitable for executing various tasks, also referred to as applications in the following description. The applications have a graphical user interface. The product also contains DTMs that has HART tool routing functionality. Tool routing describes a mechanism to enable sub connected DTMs, such as the Basic HART DTM to communicate through a S800 I/O DTM to HART instruments connected to a S800 I/O module. For this function no graphical user interface is required.